NuPET Plastic Resin

Innovative Crystallized PET Resins

NuPET for nucleation and control of crystallization for PET

NuPET resins offer nucleation and control of crystallization in PET formulations. NuPET can be offered as a master batch used at low levels to accelerate crystallization in customer formulations. NuPET is also available as a fully formulated product for extruded and blown film products tailored for elevated crystallinity and improved heat seal strength. These rapidly crystallizing materials increase processing speeds and heat stability in a wide range of extrusion, blown film, injection molding, and thermoforming applications.

Typical Applications

  • Structural Thermoformed Product
  • Specialty Packaging
  • Extruded Product
  • Multi-Layer Films
  • Heat Stable Injection Molded Product

NuPET Advantages

  • Extreme Durability
  • Good Elongation
  • Impact Resistance
  • High Initial Crystallinity
  • High Thermal Stability in Finished Product
  • High Processing Outputs
  • Can Be Used as a Stand Alone Product or a Master Batch in CPET and Other Material Formulations
  • FDA Food Contact Approved

Technical specifications

NuPET 2411
ASTM & ISO Properties
Physical Nominal Value Unit Test Method
Density 1.14 g/cc ISO 1183
Molding Shrinkage 1.2 % ASTM D955
Mechanical Nominal Value Unit Test Method
Tensile Modulus 343,449 psi ASTM D638
Tensile Strength 8,541 psi ASTM D638
Elongation @ Break 111 % ASTM D638
Flexural Modulus 367,611 psi ASTM D790
DTUL @ 1,820 kPa 71   °C ASTM D648
Impact Nominal Value Unit Test Method
Notched Izod (RT) 0.82 Ft.-Lb./In. ASTM D256
Notched Izod (-40°C) 0.57 Ft.-Lb./In. ASTM D256
Rheological Nominal Value Unit Test Method
Melt Index 0.60 g/10 min. 285°C, 3.8 kg,
0.040″ Orifice
Melt Viscosity 61 poise 190°C, 100 secˉ¹

Thermal Properties as Measured by DSC: Retains the melting point of PET; and Accelerated Rate of Crystallization.

Download Product Data Sheet (PDF file)